15g/h Pool Chlorine Generator Kit
Engineered for small inground pools and above-ground setups, the Century 15g/h system offers a reliable, compact sanitation solution.
- Produces 15 grams of pure chlorine per hour
- Designed for pools up to 15,000 gallons.
- Ships with power center, titanium cell, and plumbing unions
The Ideal Salt Water Pool Conversion Kit
When your clients want to move away from handling liquid chlorine, the Century 15g/h system serves as the perfect salt water pool conversion kit. It is specifically scaled for smaller water volumes, ensuring you don’t over-chlorinate tight spaces. As a comprehensive pool chlorine generator kit, it provides contractors with everything needed for a fast, drop-in installation on a crowded equipment pad. The included Ru-Ir coated titanium cell guarantees long-lasting performance, reducing warranty callbacks for installers.
Standard Specifications – 15g/h Pool Chlorine Generator
Century engineered the 15g/h kit with independent power and cell modules. If a power surge damages the control center years down the line, contractors do not need to force their clients to buy a whole new system. As long as you source a DC power supply that meets our specified voltage and amperage requirements, the existing salt cell will continue to operate flawlessly.
Homeowners and service technicians hate navigating complex digital menus just to turn on the chlorine. This unit features true intelligent simplicity. There are no complicated parameters to dial in—just a straightforward, one-button start/stop operation that gets the pool sanitized immediately after the plumbing glue dries.
| Feature | Specification |
|---|---|
| Chlorine Output Options | 15g/h |
| Cell Material | Commercial-Grade Titanium with MMO Coating |
| Self-Cleaning Method | Automatic Reverse Polarity |
| Ideal Salinity Range | 2,700 ppm – 3,400 ppm (operates up to 4,500 ppm) |
| Input Voltage | 110V / 220V AC (Specified) |
| Plumbing Connections | 1.5 inch / 2 inch standard PVC unions |
Applications – 15g/h Pool Chlorine Generator
Designed specifically for setups where plumbing space is limited and oversized chlorination is a liability.
- Plunge Pools & Spools: Perfect for small backyard water features that require steady, low-volume chlorine production to prevent chemical spikes.
- Above-Ground Pool Retrofits: An easy drop-in upgrade for clients wanting to convert their traditional above-ground pools to salt water.
- Tight Equipment Pads: When the pump, filter, and heater leave almost no straight pipe run, this compact module fits exactly where you need it.
Frequently Asked Questions (FAQs)
Yes, it is highly suitable for permanent above-ground pools. However, for temporary or soft-sided pools that use proprietary corrugated hoses rather than standard rigid PVC plumbing, specific threaded hose adapters may be required to connect to the included 1.5-inch slip unions.
For the majority of small residential pools utilizing standard 1.5-inch plumbing and single-speed pumps under 1.5 horsepower, a bypass loop is not strictly necessary. The cell housing is designed to handle standard residential flow rates without creating significant backpressure on the filtration system.
Sizing the output is simple via the control panel. Because the 15g/h unit is rated for up to 15,000 gallons, installing it on a 5,000-gallon pool means you should initially set the daily output dial to roughly 30% to 40%. Test the free chlorine residual after 24 hours and adjust the dial up or down until you maintain a consistent 1.0 to 3.0 ppm of free chlorine.
No. The operating salinity of this salt water pool conversion kit is approximately 3,200 parts per million (ppm). This is roughly one-tenth the salinity of ocean water and is actually below the threshold of human taste. At this mild concentration, it acts as a water softener and will not cause premature corrosion to properly grounded pool components, liners, or ladders.
Related Products
Notice: Century is an independent manufacturer of high-performance water treatment systems. All OEM trademarks (including Hayward®, Pentair®, Jandy®, and Zodiac®) are the property of their respective owners and are used here for cross-reference and compatibility purposes only. Product performance is subject to local water chemistry and bather load. We recommend installation by a licensed pool professional to ensure compliance with local electrical codes.